Sniper Hog Lights
How this switch works is:
Push the bottom button part way in and your light will come on in low mode without making any noise, you must keep pressure on it to keep the light on just like a pressure switch. Push the bottom switch all the way in and let go and your light will stay on in low mode until you push it again and then the light will go off. The top button works the same as the bottom button but the light will come on high instead of low. With this switch you can go from Off to low, off to high, low to high,high to low, high to off, low to off and thus eliminating any need for multiple switches because the Eliminator switch does it all.This switch will easily mount to your bow or gun.
We also eliminated the curly cord because all the curly cord did was get in the way and put strain on the wires in the tail cap and at the switch by constantly pulling at them. The curly cord also would cause the switch to be pulled off the velcro mount.
Please note: For the low mode to work the way it was designed, you must use only our 18650 batteries. While CR123a and AAA batteries will work, the output of the low mode will vary depending on the charge the batteries have.